Network Bulls
www.networkbulls.com
Best Institute for CCNA CCNP CCSP CCIP CCIE Training in India
M-44, Old Dlf, Sector-14 Gurgaon, Haryana, India
Call: +91-9654672192
A SIP profile comprises the set of SIP attributes that are associated with SIP trunks or SIP
endpoints. SIP profiles include information such as name, description, timing, retry, call
pickup Uniform Resource Identifier (URI), and so on. The profiles contain some standard
entries that cannot be deleted or changed.
A default SIP profile exists, called the Standard SIP Profile, which can be assigned to SIP
phones on the SIP Phone Configuration page. The Standard SIP Profile cannot be deleted
or modified. To create a new SIP profile, copy the default SIP profile, edit it, and save it with
a new name or create a new one from scratch. SIP profiles can be accessed by navigating
to Device > Device Settings > SIP Profile in CUCM Administration. The SIP Profile
Configuration page is shown in Figure 9-12.
NOTE A SIP URI consists of a call destination configured with a user@host format,
such as xten3@CompB.cisco.com or 2085017328@10.21.91.156:5060.
200 Chapter 9: CUCM Configuration
Figure 9-12 SIP Profile
Common Phone Profiles
Common phone profiles include phone configuration parameters such as the phone
password (for supported Cisco IP Phones), Do Not Disturb (DND), and personalization
settings, including end-user access to background images. After a common phone profile
has been configured, use the Phone Configuration window to associate an SCCP or SIP
phone with it.
Administrators can chose to use the default Standard Common Phone Profile that is created
when CUCM is installed, if no specific settings are required.
Common phone profiles can be accessed by navigating to Device > Device Settings >
Common Phone Profile in CUCM Administration. The Common Phone Profile
Configuration page is displayed in Figure 9-13.
No comments:
Post a Comment